Mljekare                                                                                                                                

Second-hand machines & equipment
polovna, rabljena, koristena oprema, masine, strojevi
Brugte plast maskiner

www.bosnia.dk:

Naslovna
Mljekare

Kompletne Linije
Razno
Poljoprivreda

 Mesna Industrija
 Voce-Povrce
Pakovanje

Kontakt

www.oprema.dk

Kontaktna strana
DAN-BOS ApS

Industrivej 19 b-c, DK-7700 Thisted, Denmark

Tel: + 45 97 92 61 00
DAN-BOS Danska

 

 

DAN-BOS

ponuda masina i opreme za plastiku, masine za brizganje, termormiranje, blister pak masine, ostala oprema

Masine za brizganje plastike

Item: S-3036 BATTENFELD vertical injectionmouldingmachine type BA 500/170 V - R4 Unilog 4000, Year 1989. Rotating table Ø 800 mm. 50 tons clamping force, Ø 30 mm screw More info here!  Upit

For more info click here
WINDSOR HSI 1000-C, year1981 With MOOG-control 2001 and inverter for the pumpmotor. 1000 tons clamping force, screw ø 125 mm, injectioncapacity 3,7 kg. Distance between bars 1200 x 1200 mm 2 x corepulling. New control i new screw i 1999. Can be inspected in production Upit

S-3222-Windsor-HSI1000

 
Sve se masine prodaju brzem kupcu!

Termoform masine

Item: S-3282 ILLIG RDM 37/10 From 1974, upgraded 1997 for High Speed machine, With both sides Heating. New PLC control (Magellis From Telemecanique), new mainmotor With Stöber gear, inverter, individuel control on Heating (rows á 8 pcs Heating elements), central lubricatingsystem, control coolingWater for mould. Upperpiston has accumulator tank for higher Mould speed. Max.formingarea 475 x 250 mm. Max. Depth 100 mm. With skeletal winder and stacker. Ca. 30-35 cycles/min With PS. Machine is ready for operation. Upit

 
Item: S-3267 TFT thermoformer type IMC-P-7530-1, year. 1990. Film width 450-770 mm, pitch 50-330 mm, Over and underHeating. Upit

S-3267-TFT-thermoformer-IMC-P-7530

 
Sve se masine nude brzem kupcu

 Masine za puhanje plastike

Item:S-S-3231 PROCREA Injection-blow-machine type REV 100 year 1979. 40 tons clamping force, injectioncapacity max 100 gr. Max measure for 1 cavity: Ø 90 x 160 mm. Can be seen in production Upit

S-3231_1-PROCREA

 
Item: S-3232 PROCREA Injection-blow-machine type REV 100 year 1983. 40 tons clamping force, injectioncapacity max 100 gr. Max measure for 1 cavity: Ø 90 x 160 mm. Can be seen in production Upit

 
Sve se masine prodaju brzem - prvom kupcu

 Ostala oprema za industriju plastike

     
     
Sva je oprema na prodaju brzem-prvom kupcu

Ukoliko niste pronasli sto Vas interesuje posaljite mail, mozda Vam mozemo pomoci

Kontaktirajte nas za sve sto Vas interesira iako niste pronasli na nasoj ponudi

za kontakt klikni ovdje

Prevoz nase opreme dva puta mjesecno ili po dogovoru

naslovna  | mljekare | poljoprivreda | voce-povrce | pakovanje | mesna industrija | kompletne linije| kontakt |

        www.oprema.dk                           www.bosnia.dk                           kontakt                             www.oprema.dk                       www.bosnia.dk 
Status Bar Clock